You need to upgrade your Flash Player
Your browser does not support JavaScript
To lay circles always start at the centre and work outwards. It is always good practice to dry lay before bedding on mortar.
Complete circles may be developed from a 600mm (dia.) centre stone to produce a single ring (1.5m dia.), two ring (2.46m dia.) through to a three ring (3.3m dia.) feature. Squaring- off kits for both the two ring and three ring circle are available producing 2.72m and 3.65m squares. The two and three ring circle can be obtained as a ‘Patio Pack’ containing 25 units and 41 units respectively.
Complete circles may be developed from a 600mm (dia.) centre stone to produce a single ring (1.5m dia.), two ring (2.46m dia.) through to a three ring (3.3m dia.) feature.
Squaring- off kits for both the two ring and three ring circle are available producing 2.72m and 3.65m squares.
The two and three ring circle can be obtained as a ‘Patio Pack’ containing 25 units and 41 units respectively.
Overall dimensions include an approximate 10-15mm pointing gap. All Purestone Natural Sandstone Circles have a thickness that will vary from a nominal 25-40mm and can be taken up in the bedding material.
The NEW two ring (2.46 metre diameter) circle depicted (left) may be squared-off using a Squaring-off kit comprising 4 No. (1 shown) three piece corner sets producing a paved area of approximately 7.4 square metres.
This NEW circular feature is comprised of all 41 elements creating a 3.3 metre diameter circle. A squaring-off kit comprising 4 No. five piece corner sets (20 pieces in total) is used to square the circle producing an overall paved area of approximately 13.3 square metres.
customerservice@stoneflair.com