Purestone Antique Paving and Circular Paving

Purestone Antique Paving

Each piece of Antique Sandstone Paving has its own surface texture, markings and colour and when wet the colours are further embellished. No two pavings are alike which greatly enhances its visual appeal. It is therefore important to view a range of samples at the stockist’s yard to appreciate the diversity of this and all StoneFlair’s natural stone products.

Product Information

1. The thickness of all Purestone Antique Sandstone Paving will vary from a nominal 25mm-40mm and can be taken up in the bedding material.
2. We recommend that Purestone Antique Paving is laid on a full mortar bed. When laying, the addition of a P.V.A. admix to the bedding mortar mix can enhance bonding or adhesion if required.
3. The tumbled edge detail on all Purestone Antique Paving exhibits a slight taper running towards the back face of the Flag and should therefore be laid ‘large’ face up.
4. Available in large or small patio packs only.

Purestone Antique Paving
Cragside	Fieldmoor	Glendale

Patio Layout Information

Small Patio Pack

Width: 3.35 Metres Height: 2.15 Metres

The small patio pack covers approximately 7.2 square metres (allowing for 10-15mm joints). It comprises the following elements:

• 6 No. 900 x 600mm
• 6 No. 600 x 600mm
• 6 No. 600 x 290mm
• 5 No. 290 x 290mm
• (Total: 23 No. units)

Purestone Antique Circular Paving

NEW Spinning Circle (2.46 metres dia.) can be squared-off using a squaring-off kit producing a paved area of approximately 7.4 square metres. Available in Cragside and Glendale mixed. Can be laid in a regular pattern or randomly.

NEW Octagon comes complete with squaring-off kit creating a square of 2.5 x 2.5 metres.

Product Information